Show simple item record

dc.contributor.authorS. Floreen
dc.date.accessioned2017-05-08T23:02:57Z
dc.date.available2017-05-08T23:02:57Z
dc.date.copyrightJanuary, 1977
dc.date.issued1977
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26850#70_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/89938
dc.description.abstractThe mechanical properties of four cast high-strength steels, 4340, 15-5 PII stainless steel, and two maraging steels were examined. To provide a direct comparison with wrought steels split heats were prepared in which part of each heat was sand cast and the balance was forged and hot-rolled to plate. The KIc properties of the castings were comparable to the plate properties. Limited tests indicated that the cast steels also had reasonably good fatigue and stress corrosion cracking resistance. The castings showed surprisingly low Charpy values, which was attributed to notch acuity due to the more heterogeneous nature of the fractures in the cast structures. The overall results suggest that cast high-strength steels had satisfactory toughness and could be used in many applications.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Fracture Toughness of Cast High-Strength Steels
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443409
dc.journal.fristpage70
dc.journal.lastpage75
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsFracture toughness
dc.keywordsStainless steel
dc.keywordsToughness
dc.keywordsFatigue
dc.keywordsHeat
dc.keywordsSands
dc.keywordsElectrical resistance
dc.keywordsStress corrosion cracking
dc.keywordsMechanical properties AND Fracture (Process)
dc.treeJournal of Engineering Materials and Technology:;1977:;volume( 099 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record