Show simple item record

dc.contributor.authorA. W. Dalcher
dc.contributor.authorT. M. Yang
dc.contributor.authorC. L. Chu
dc.date.accessioned2017-05-08T23:02:57Z
dc.date.available2017-05-08T23:02:57Z
dc.date.copyrightJanuary, 1977
dc.date.issued1977
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26850#65_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/89937
dc.description.abstractThermal-elastic analyses of dissimilar metal transition weld joints of a 24″ sodium piping system were performed. This piping system is for Liquid Metal Fast Breeder Reactor application, operating at elevated temperature (965°F). These analyses form a basis for the selection of the material combination and weld preparation of the transition joints. Two material combinations were selected for weld joint thermal-elastic analysis: 2 1/4 Cr - 1 Mo ferritic steel to 316 stainless steel, and 2 1/4 Cr - 1 Mo steel to Incoloy 800, with Inconel 82 as the welding metal in both cases. Weld preparations with various geometries were assumed for each material combination. The transition joints were evaluated for thermal loadings due to the changes in sodium temperatures during anticipated operating conditions of the breeder reactor. Thermal analyses were performed to define the temperature time history in the metals; the temperature gradient across the wall thickness; and especially, the temperature distribution near the material interfaces. The magnitude of the temperature gradients and the temperature distribution as affected by the heat transfer characteristics of each material were of particular interest. Stresses created due to the differences of thermal expansion of the materials, radial and axial temperature gradients, and applied internal pressure were evaluated using finite element analysis methods. In this investigation, the materials were treated as elastic and isotropic. The contributions from the applied pressure and thermal loading were separated from the total stresses and the most important contributor was identified. The elastic analyses served for a preliminary evaluation of the transition joint selection. Based on the information obtained in stress versus material combination and the stress variation as a function of the geometry of the weld preparation, a weld design (material combination and geometry) was selected.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHigh Temperature Thermal-Elastic Analysis of Dissimilar Metal Transition Joints
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443408
dc.journal.fristpage65
dc.journal.lastpage69
dc.identifier.eissn1528-8889
dc.keywordsMetals
dc.keywordsHigh temperature
dc.keywordsStress
dc.keywordsTemperature
dc.keywordsTemperature gradients
dc.keywordsPressure
dc.keywordsSteel
dc.keywordsGeometry
dc.keywordsPiping systems
dc.keywordsSodium
dc.keywordsTemperature distribution
dc.keywordsThermal analysis
dc.keywordsWall thickness
dc.keywordsElastic analysis
dc.keywordsBreeder reactors
dc.keywordsStainless steel
dc.keywordsWelding
dc.keywordsDesign
dc.keywordsFinite element analysis
dc.keywordsThermal expansion
dc.keywordsHeat transfer AND Liquid metal fast breeder reactors
dc.treeJournal of Engineering Materials and Technology:;1977:;volume( 099 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record