Show simple item record

dc.contributor.authorJ. Tirosh
dc.contributor.authorG. Grossman
dc.date.accessioned2017-05-08T23:02:57Z
dc.date.available2017-05-08T23:02:57Z
dc.date.copyrightJanuary, 1977
dc.date.issued1977
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26850#52_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/89935
dc.description.abstractA multistage continuous extrusion process based on a new concept is described and studied. The billet is driven through a series of dies by the viscous drag of a fluid flowing along its perimeter, allowing for an unlimited length of the extruded product. Design parameters are obtained from an analysis of the flow and of the stresses in the billet. The geometry of the dies, the extrusion chambers, and the optimal flow characteristics are determined. Technical problems such as buckling of the billet and temperature rise of the fluid are discussed. Experimental results with a one-stage unit are given and compared to the theoretical prediction.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleContinuous Extrusion by Viscous Drag
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443406
dc.journal.fristpage52
dc.journal.lastpage58
dc.identifier.eissn1528-8889
dc.keywordsDrag (Fluid dynamics)
dc.keywordsExtruding
dc.keywordsFlow (Dynamics)
dc.keywordsFluids
dc.keywordsTemperature
dc.keywordsStress
dc.keywordsDesign
dc.keywordsBuckling AND Geometry
dc.treeJournal of Engineering Materials and Technology:;1977:;volume( 099 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record