Show simple item record

dc.contributor.authorE. R. Gilbert
dc.contributor.authorL. D. Blackburn
dc.date.accessioned2017-05-08T23:02:56Z
dc.date.available2017-05-08T23:02:56Z
dc.date.copyrightApril, 1977
dc.date.issued1977
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26852#168_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/89920
dc.description.abstractCreep deformation of internally pressurized tube specimens of 20 percent cold worked Type 316 stainless steel was measured under isothermal, constant stress conditions. Stress levels varied from zero to as high as 413 MPa (60,000 psi) for tests at five temperatures over the range from 714 K (825°F) to 1033 K (1400°F) for times to 3.6 × 106 seconds (2410 hours). Experimental results were represented by an equation of the form εc = Aσ cosh−1 (1 + rt) + Pσn tm + Qσn t2.5 where εc is the creep strain, σ is the stress, t is time, and the remaining quantities are temperature dependent parameters.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCreep Deformation of 20 Percent Cold Worked Type 316 Stainless Steel
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443428
dc.journal.fristpage168
dc.journal.lastpage180
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsStainless steel
dc.keywordsStress
dc.keywordsTemperature AND Equations
dc.treeJournal of Engineering Materials and Technology:;1977:;volume( 099 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record