Show simple item record

dc.contributor.authorJ. P. Young
dc.contributor.authorA. W. Ruff
dc.date.accessioned2017-05-08T23:02:55Z
dc.date.available2017-05-08T23:02:55Z
dc.date.copyrightApril, 1977
dc.date.issued1977
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26852#121_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/89911
dc.description.abstractA method being used to measure the erosive wear of metals at different temperatures and under controlled environmental conditions is described. A commercial apparatus has been modified that can be used for tests at 500°C and above and over a wide range of particle types, sizes, velocities, and concentrations. Test results from several iron and nickel base alloys are presented. Particular interest has been placed in the role of the oxide scale, in the particle velocity dependence and the impingement angle dependence of erosion rates, as well as the effect of varying particle concentration in the stream. Reproducibility among the tests of about 10 percent can be realized if care is exercised with regard to several important experimental parameters.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleParticle Erosion Measurements on Metals
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443420
dc.journal.fristpage121
dc.journal.lastpage125
dc.identifier.eissn1528-8889
dc.keywordsMetals
dc.keywordsMeasurement
dc.keywordsParticulate matter
dc.keywordsErosion
dc.keywordsIron
dc.keywordsNickel
dc.keywordsAlloys
dc.keywordsWear AND Temperature
dc.treeJournal of Engineering Materials and Technology:;1977:;volume( 099 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record