Show simple item record

dc.contributor.authorP. H. Thornton
dc.contributor.authorC. L. Magee
dc.date.accessioned2017-05-08T23:02:55Z
dc.date.available2017-05-08T23:02:55Z
dc.date.copyrightApril, 1977
dc.date.issued1977
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26852#114_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/89910
dc.description.abstractThe specific energy absorbed during uniaxial tension and during axial compression of cylindrical tubes with various wall thicknesses and diameters has been measured for 1015 steel in two heat treatment conditions and for 6061 aluminum alloy in four heat treatment conditions. For axial compression of tubes, the energy absorbed/unit weight, Esc, is a function of the thickness to diameter ratio and the present work shows that for 0.02 < t/D < 0.1, the dependence is well described by a power law of the form Esc = A(t/D)m where m varies between 0.5 and 1.0 for different materials. A salient finding is that the ranking of materials for specific energy absorption depends upon the testing mode. In tension, it is shown that density ρ, ultimate tensile strength σult and the uniform elongation, εu are significant in the ranking of materials. Specifically, the present and previous results show that the energy absorbed/unit weight, depends upon both the ultimate tensile strength σult and the corresponding true (tensile) strains εu , EsT = σult εu /ρ(1 + εu ). In axial compression, however, the measured variations in Esc (for a fixed geometry) with the different materials show that Esc is simply proportional to the specific ultimate tensile strength (σult /ρ). The magnitude of the tensile uniform elongation is unimportant in ranking materials for this compression collapse mode because the geometric instability present in tension tests does not arise in the plastic buckling process that occurs during the axial compression of cylinders.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Interplay of Geometric and Materials Variables in Energy Absorption
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443419
dc.journal.fristpage114
dc.journal.lastpage120
dc.identifier.eissn1528-8889
dc.keywordsAbsorption
dc.keywordsCompression
dc.keywordsTensile strength
dc.keywordsTension
dc.keywordsWeight (Mass)
dc.keywordsHeat treating (Metalworking)
dc.keywordsElongation
dc.keywordsBuckling
dc.keywordsCollapse
dc.keywordsTesting
dc.keywordsSteel
dc.keywordsAluminum alloys
dc.keywordsThickness
dc.keywordsWall thickness
dc.keywordsCylinders
dc.keywordsGeometry AND Density
dc.treeJournal of Engineering Materials and Technology:;1977:;volume( 099 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record