Show simple item record

dc.contributor.authorMasato Nagao
dc.contributor.authorVolker Weiss
dc.date.accessioned2017-05-08T23:02:55Z
dc.date.available2017-05-08T23:02:55Z
dc.date.copyrightApril, 1977
dc.date.issued1977
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26852#110_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/89909
dc.description.abstractAn X-Ray diffraction analysis of low cycle bending fatigue was conducted on plain carbon steel (SAE 1008) in three conditions, as received (annealed) 20 percent prestrained, and strain aged. The decrease of the surface stresses at maximum and minimum strains, a reduction of the residual surface stress after unloading from the tension cycle, and a decrease of the half-value breadth during the first 20–30 cycles indicate rapid cyclic softening during the initial stages of strain cycling. After this initial period the microstructure of all specimens was found to be independent of the initial material condition. Similarly, the fatigue life as a function of strain range was also independent of the initial condition. X-Ray diffraction line analysis shows no changes for the major portion of the specimen life, from 0.1 Nf to 0.75 Nf . However, a linear relationship between half-value breadth and strain range is noted. It is suggested that this relationship can be utilized for monitoring and diagnostic purposes, particularly to determine the strain range to which a critical part has been subjected.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleX-Ray Diffraction Study of Low Cycle Fatigue Damage in Plain Carbon Steel
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443418
dc.journal.fristpage110
dc.journal.lastpage113
dc.identifier.eissn1528-8889
dc.keywordsX-ray diffraction
dc.keywordsCarbon steel
dc.keywordsLow cycle fatigue
dc.keywordsCycles
dc.keywordsStress
dc.keywordsFatigue life
dc.keywordsTension AND Fatigue
dc.treeJournal of Engineering Materials and Technology:;1977:;volume( 099 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record