Show simple item record

dc.contributor.authorF. Katsamanis
dc.contributor.authorP. S. Theocaris
dc.contributor.authorD. Raftopoulos
dc.date.accessioned2017-05-08T23:02:55Z
dc.date.available2017-05-08T23:02:55Z
dc.date.copyrightApril, 1977
dc.date.issued1977
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26852#105_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/89908
dc.description.abstractThe stress intensity factors in plexiglas plates containing an edge crack and subjected to static or dynamic loading are determined by the optical method of caustics. Measurements of the applied load were accomplished by means of a piezoelectric transducer and the caustics obtained in the experiments were photographed during the process of loading by using a Cranz-Schardin high speed camera. It has been found that the stress intensity factors for a dynamic loading are always higher than the corresponding stress intensity factors for a static loading of the same magnitude.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStatic and Dynamic Stress Intensity Factors by the Method of Transmitted Caustics
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443417
dc.journal.fristpage105
dc.journal.lastpage109
dc.identifier.eissn1528-8889
dc.keywordsHazardous substances
dc.keywordsStress
dc.keywordsDynamic testing (Materials)
dc.keywordsFracture (Materials)
dc.keywordsPiezoelectric transducers
dc.keywordsPlates (structures) AND Measurement
dc.treeJournal of Engineering Materials and Technology:;1977:;volume( 099 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record