Show simple item record

dc.contributor.authorD. F. Adams
dc.contributor.authorJ. L. Perry
dc.date.accessioned2017-05-08T23:02:54Z
dc.date.available2017-05-08T23:02:54Z
dc.date.copyrightJuly, 1977
dc.date.issued1977
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26855#257_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/89898
dc.description.abstractLaminated graphite/epoxy composites, with and without the addition of plies of glass fabric/epoxy or unidirectional glass yarn/epoxy, were subjected to impact levels less than those necessary to cause total failure. These low level impact specimens, and undamaged control specimens as well, were then subjected to either static flexure or full impact loadings. Using an instrumented impact testing machine, the maximum impact forces and the impact moduli were determined, and compared to the corresponding values from the static tests. The maximum force was independent of loading rate, while the impact modulus was significantly less than the static flexural modulus. The various composites were found to be severely degraded by the low level impacts.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLow Level Charpy Impact Response of Graphite/Epoxy Hybrid Composites
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443529
dc.journal.fristpage257
dc.journal.lastpage263
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsEpoxy adhesives
dc.keywordsGraphite
dc.keywordsForce
dc.keywordsGlass
dc.keywordsTextiles
dc.keywordsYarns
dc.keywordsMachinery
dc.keywordsBending (Stress)
dc.keywordsFailure AND Impact testing
dc.treeJournal of Engineering Materials and Technology:;1977:;volume( 099 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record