| dc.contributor.author | O. K. Chopra | |
| dc.contributor.author | K. Natesan | |
| dc.date.accessioned | 2017-05-08T23:02:52Z | |
| dc.date.available | 2017-05-08T23:02:52Z | |
| dc.date.copyright | October, 1977 | |
| dc.date.issued | 1977 | |
| dc.identifier.issn | 0094-4289 | |
| dc.identifier.other | JEMTA8-26857#366_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/89872 | |
| dc.description.abstract | An analysis of tensile behavior of Type 304 stainless steel was conducted for specimens in the solution-annealed condition and after exposure to a sodium environment. The Voce equation was used to describe tensile flow curves for plastic strains above 0.005 at temperatures between 550 and 700°C and strain rates of 3.81 × 10−6 to 1.90 × 10−3 s−1 . The results show that, when compared with solution-annealed specimens, the tensile flow behavior of the sodium-exposed specimens is characterized by a higher strain-hardening rate, which decreases rapidly with an increase in flow stress. The values of the saturation stress for uniform elongation predicted from the Voce model are higher for the sodium-exposed specimens than for those in the solution-annealed condition at strain rates ≲5 × 10−5 s−1 and lower for strain rates ≳5 × 10−5 s−1 . Metallographic examination of the fracture surfaces shows a transition from a complete ductile fracture to a partial intergranular failure as the strain rate decreases. Carburization of the specimens appears to inhibit the intergranular failure. | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | Representation of Elevated-Temperature Tensile Behavior of Type 304 Stainless Steel in a Sodium Environment | |
| dc.type | Journal Paper | |
| dc.journal.volume | 99 | |
| dc.journal.issue | 4 | |
| dc.journal.title | Journal of Engineering Materials and Technology | |
| dc.identifier.doi | 10.1115/1.3443553 | |
| dc.journal.fristpage | 366 | |
| dc.journal.lastpage | 371 | |
| dc.identifier.eissn | 1528-8889 | |
| dc.keywords | Temperature | |
| dc.keywords | Sodium | |
| dc.keywords | Stainless steel | |
| dc.keywords | Flow (Dynamics) | |
| dc.keywords | Failure | |
| dc.keywords | Stress | |
| dc.keywords | Carburization | |
| dc.keywords | Fracture (Process) | |
| dc.keywords | Elongation | |
| dc.keywords | Equations | |
| dc.keywords | Work hardening AND Ductile fracture | |
| dc.tree | Journal of Engineering Materials and Technology:;1977:;volume( 099 ):;issue: 004 | |
| dc.contenttype | Fulltext | |