Show simple item record

dc.contributor.authorG. R. Yoder
dc.contributor.authorL. A. Cooley
dc.contributor.authorT. W. Crooker
dc.date.accessioned2017-05-08T23:02:52Z
dc.date.available2017-05-08T23:02:52Z
dc.date.copyrightOctober, 1977
dc.date.issued1977
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26857#313_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/89864
dc.description.abstractSignificant enhancement in fatigue crack propagation resistance and plane strain fracture toughness was obtained in commercial purity Ti-6Al-4V and Ti-6Al-6V-2Sn through microstructural modification. Alloys studied were in the form of 25.4 mm-thick plate with interstitial oxygen contents of 0.20 and 0.17 weight percent, respectively. Heat treatments were chosen to provide widely varied microstructures; these included a mill anneal, recrystallization anneal and a beta anneal. The most beneficial heat treatment for improving these crack tolerance properties was found to be the beta anneal. However, the beta anneal resulted in yield strength reductions of 9 to 14 percent, from levels associated with the original mill anneal. The recrystallization anneal provided significant enhancement of plane strain fracture toughness and marginal improvement in fatigue crack propagation resistance with negligible loss of yield strength.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEnhancement of Fatigue Crack Growth and Fracture Resistance in Ti-6Al-4V and Ti-6Al-6V-2Sn Through Microstructural Modification
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443546
dc.journal.fristpage313
dc.journal.lastpage318
dc.identifier.eissn1528-8889
dc.keywordsElectrical resistance
dc.keywordsFracture (Process)
dc.keywordsFatigue cracks
dc.keywordsFracture toughness
dc.keywordsRecrystallization
dc.keywordsPlane strain
dc.keywordsYield strength
dc.keywordsWeight (Mass)
dc.keywordsHeat
dc.keywordsAlloys
dc.keywordsHeat treating (Metalworking)
dc.keywordsFracture (Materials) AND Oxygen
dc.treeJournal of Engineering Materials and Technology:;1977:;volume( 099 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record