Show simple item record

dc.contributor.authorR. Koterazawa
dc.contributor.authorT. Mori
dc.date.accessioned2017-05-08T23:02:51Z
dc.date.available2017-05-08T23:02:51Z
dc.date.copyrightOctober, 1977
dc.date.issued1977
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26857#298_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/89862
dc.description.abstractA critical examination was made of the applicability of fracture mechanics parameters to crack propagation under creep condition with 304 stainless steels for a variety of specimen geometries at relatively high stress levels. The creep crack propagation rate could not be described in terms of elastic stress intensity factor but it could be in terms of net section stress for all dimensions of thin plate specimen. The net section stress, however, could not explain the difference between crack propagation rates of thin plate specimens and those of notched round bar specimens. This difference could be ascribed to the plastic constraint around the crack tip. Applicability of the modified J-integral to creep crack propagation was also examined and the results showed that this parameter was better for predicting the creep crack propagation rate at a high stress level. In the case of speicmens of similar geometries, the net section stress could be used in place of the modified J-integral provided that crack propagation rate was divided by the characteristic length of the specimen.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleApplicability of Fracture Mechanics Parameters to Crack Propagation Under Creep Condition
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443544
dc.journal.fristpage298
dc.journal.lastpage305
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsFracture mechanics
dc.keywordsCrack propagation
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsDimensions AND Stainless steel
dc.treeJournal of Engineering Materials and Technology:;1977:;volume( 099 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record