| dc.contributor.author | A. M. Sullivan | |
| dc.contributor.author | T. W. Crooker | |
| dc.date.accessioned | 2017-05-08T23:01:43Z | |
| dc.date.available | 2017-05-08T23:01:43Z | |
| dc.date.copyright | May, 1976 | |
| dc.date.issued | 1976 | |
| dc.identifier.issn | 0094-9930 | |
| dc.identifier.other | JPVTAS-28131#179_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/89210 | |
| dc.description.abstract | High-strength pressure vessel steel surface flaw or part-through crack (PTC) specimens were selected for studies of fatigue crack growth rate (da/dN) under constant amplitude cycling to assess the effects of varied stress ratio R (minimum nominal stress/maximum nominal stress, σmin /σmax ) and stress level (maximum nominal stress/yield stress, σmax /σys ). Analyzed within the framework of linear elastic fracture mechanics, these studies warrant the following conclusions regarding fatigue-crack growth in this material: • Crack growth does not appear to be influenced by stress level, per se, even for stress levels approaching net section yield. • It is moderately influenced by both positive (tension-tension) and negative (tension-compression) stress ratios. • It is principally related to the tensile range of cyclic stress as expressed by the fracture mechanics stress-intensity range parameter, ΔK. Utilizing the results of this investigation, a normalizing relationship expressing da/dN as a function of both ΔK and R, which is applicable to both positive and negative values, is discussed. It is concluded that the stress-intensity range ΔK provides a viable analytical approach to fatigue crack-growth analyses relevant to high-strength pressure vessels. | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | Analysis of Fatigue-Crack Growth in a High-Strength Steel—Part I: Stress Level and Stress Ratio Effects at Constant Amplitude | |
| dc.type | Journal Paper | |
| dc.journal.volume | 98 | |
| dc.journal.issue | 2 | |
| dc.journal.title | Journal of Pressure Vessel Technology | |
| dc.identifier.doi | 10.1115/1.3454357 | |
| dc.journal.fristpage | 179 | |
| dc.journal.lastpage | 184 | |
| dc.identifier.eissn | 1528-8978 | |
| dc.keywords | High strength steel | |
| dc.keywords | Stress | |
| dc.keywords | Fatigue cracks | |
| dc.keywords | Tension | |
| dc.keywords | Fracture (Materials) | |
| dc.keywords | Fracture mechanics | |
| dc.keywords | Pressure vessels | |
| dc.keywords | Fatigue | |
| dc.keywords | Steel | |
| dc.keywords | Yield stress AND Compression | |
| dc.tree | Journal of Pressure Vessel Technology:;1976:;volume( 098 ):;issue: 002 | |
| dc.contenttype | Fulltext | |