Show simple item record

dc.contributor.authorJ. F. Copeland
dc.date.accessioned2017-05-08T23:01:42Z
dc.date.available2017-05-08T23:01:42Z
dc.date.copyrightMay, 1976
dc.date.issued1976
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28131#135_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/89203
dc.description.abstractThe effects of sulfur content on the fracture toughness properties of 2 1/4Cr-1 Mo steel were evaluated at test temperatures above, at, and below the nil ductility transition temperature (NDTT) of −23°C (−10°F). Small, 12.7-mm (0.5-in.) thick compact tension specimen results were combined with J-integral, Equivalent Energy, and Crack Opening Displacement analytical techniques to provide KIc results up to 22°C (72°F). It was found that the sulfur content of this steel has a large detrimental effect on KIc at the NDTT and above, where microvoid coalescence is the fracture mode. Sulfur has no significant effect at −73°C (−100°F) where cleavage occurs. These results also indicate that the higher Charpy V-notch energy at NDTT, shown by lower sulfur steels, is translatable into increased fracture resistance.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInfluence of Sulfur Content on the Fracture Toughness Properties of 2 1/4 Percent Cr-1 Percent Mo Steel
dc.typeJournal Paper
dc.journal.volume98
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454350
dc.journal.fristpage135
dc.journal.lastpage142
dc.identifier.eissn1528-8978
dc.keywordsSteel
dc.keywordsFracture toughness
dc.keywordsSulfur
dc.keywordsFracture (Process)
dc.keywordsDisplacement
dc.keywordsTension
dc.keywordsElectrical resistance
dc.keywordsPhase transition temperature
dc.keywordsDuctility AND Temperature
dc.treeJournal of Pressure Vessel Technology:;1976:;volume( 098 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record