Show simple item record

dc.contributor.authorR. L. Klueh
dc.contributor.authorT. L. Hebble
dc.date.accessioned2017-05-08T23:01:41Z
dc.date.available2017-05-08T23:01:41Z
dc.date.copyrightMay, 1976
dc.date.issued1976
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28131#118_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/89200
dc.description.abstractWe have conducted a detailed series of tensile tests on one heat of annealed 2 1/4 Cr-1 Mo steel over the range 25 to 593°C (75 to 1100°F) and at nominal strain rates of 0.4, 0.04, 0.004, and 0.0004/min. To determine an empirical relationship to represent the flow behavior, we fitted the true-stress true-strain data from these tests to several proposed models. The models fit were those proposed by Hollomon, Ludwik, Ludwigson, and Voce. From a comparison of the standard error of estimate, the Voce equation was concluded to be the best mathematical description of the data under most test conditions and the best single representation over the wide range of test conditions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Mathematical Description for the Stress-Strain Behavior of Annealed 2 1/4 Cr-1 Mo Steel
dc.typeJournal Paper
dc.journal.volume98
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454348
dc.journal.fristpage118
dc.journal.lastpage125
dc.identifier.eissn1528-8978
dc.keywordsSteel
dc.keywordsStress
dc.keywordsEquations
dc.keywordsErrors
dc.keywordsFlow (Dynamics) AND Heat
dc.treeJournal of Pressure Vessel Technology:;1976:;volume( 098 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record