Show simple item record

dc.contributor.authorJ. M. Steichen
dc.contributor.authorR. L. Knecht
dc.date.accessioned2017-05-08T23:01:41Z
dc.date.available2017-05-08T23:01:41Z
dc.date.copyrightMay, 1976
dc.date.issued1976
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28131#105_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/89198
dc.description.abstractThe elevated temperature mechanical properties of large diameter (28 in.) seamless pipe produced by roll extrusion for use as primary piping for sodium coolant in the Fast Flux Test Facility (FFTF) have been characterized. The three heats of type 316H stainless steel piping material used in this study exhibited very consistent mechanical properties and chemical compositions. Tensile and creep-rupture properties exceed values on which the allowable stresses for ASME Code Case 1592 on Nuclear Components in Elevated Temperature Service were based. Tensile strength and ductility were essentially unchanged by aging in static sodium at 1050°F (566°C) for times to 10,000 hr. High strain rate tensile tests showed that tensile properties were insensitive to strain rate at temperatures to 900°F (482°C) and that for temperatures of 1050°F (566°C) and above both strength and ductility significantly increased with increasing strain rate. Fatigue-crack propagation properties were comparable to results obtained on plate material and no differences in crack propagation were found between axial and circumferential orientations.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMechanical Properties of Roll Extruded Nuclear Reactor Piping
dc.typeJournal Paper
dc.journal.volume98
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454346
dc.journal.fristpage105
dc.journal.lastpage110
dc.identifier.eissn1528-8978
dc.keywordsMechanical properties
dc.keywordsPipes
dc.keywordsNuclear reactors
dc.keywordsTemperature
dc.keywordsDuctility
dc.keywordsSodium
dc.keywordsStainless steel
dc.keywordsTensile strength
dc.keywordsTest facilities
dc.keywordsASME Standards
dc.keywordsCreep
dc.keywordsRupture
dc.keywordsExtruding
dc.keywordsStress
dc.keywordsCoolants
dc.keywordsCrack propagation AND Fatigue cracks
dc.treeJournal of Pressure Vessel Technology:;1976:;volume( 098 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record