Show simple item record

dc.contributor.authorR. Raj
dc.date.accessioned2017-05-08T23:00:44Z
dc.date.available2017-05-08T23:00:44Z
dc.date.copyrightApril, 1976
dc.date.issued1976
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26846#132_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/88671
dc.description.abstractNucleation of intergranular cracks during steady-state and cyclic creep is analyzed in detail. The basis of the analysis is that grain boundary sliding produces stress concentrations at inclusions, ledges and triple-line junctions which leads to nucleation of cracks. The analysis is built upon different facets of the mechanical behavior of grain boundaries such as: sliding with elastic accommodation, diffusional and power law creep accommodation, and the contribution of sliding to the strain rate under power law creep conditions. Inclusions play an important role in fracture since the energy of the inclusion-matrix interface is usually high and since sliding produces stress concentration at inclusions. Triple line fracture is shown to be important during transient creep conditions. Crack initiation is calculated as a function of the following engineering parameters: temperature, strain rate, grain size, inclusions, cyclic frequency and hold time. The results are in broad agreement with experimental observations.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCrack Initiation In Grain Boundaries Under Conditions of Steady-State and Cyclic Creep
dc.typeJournal Paper
dc.journal.volume98
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443355
dc.journal.fristpage132
dc.journal.lastpage139
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsGrain boundaries
dc.keywordsFracture (Materials)
dc.keywordsSteady state
dc.keywordsNucleation (Physics)
dc.keywordsFracture (Process)
dc.keywordsMechanical behavior
dc.keywordsGrain size
dc.keywordsJunctions
dc.keywordsStress
dc.keywordsTemperature AND Stress concentration
dc.treeJournal of Engineering Materials and Technology:;1976:;volume( 098 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record