Show simple item record

dc.contributor.authorY. Ohashi
dc.contributor.authorN. Mori
dc.contributor.authorK. Kawashima
dc.date.accessioned2017-05-08T23:00:44Z
dc.date.available2017-05-08T23:00:44Z
dc.date.copyrightJuly, 1976
dc.date.issued1976
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26847#282_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/88659
dc.description.abstractProportional combined loading tests using axial load and torque were conducted on thin-walled tubular specimens of annealed isotropic aluminum alloy 5056. The experimental results showed that the third invariant of stress deviator affects considerably the plastic deformation of the material; that is, an equivalent stress-equivalent strain curve for simple tension or compression appears higher than that for pure torsion and the plastic strain vector is generally noncoaxial with the deviatoric stress vector. These results were formulated in the form of a nonlinear tensor relation between stress deviator and plastic strain on the basis of the general relation between coaxial tensors. The tensor equation derived was found to represent well the experimental results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOn Proportional Combined Loading Tests of an Aluminum Alloy and Its Analytical Formulation
dc.typeJournal Paper
dc.journal.volume98
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443379
dc.journal.fristpage282
dc.journal.lastpage288
dc.identifier.eissn1528-8889
dc.keywordsAluminum alloys
dc.keywordsStress
dc.keywordsTensors
dc.keywordsCompression
dc.keywordsEquations
dc.keywordsTension
dc.keywordsTorsion
dc.keywordsTorque AND Deformation
dc.treeJournal of Engineering Materials and Technology:;1976:;volume( 098 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record