Show simple item record

dc.contributor.authorT. Bui-Quoc
dc.contributor.authorJ. A. Choquet
dc.contributor.authorA. Biron
dc.date.accessioned2017-05-08T23:00:43Z
dc.date.available2017-05-08T23:00:43Z
dc.date.copyrightJuly, 1976
dc.date.issued1976
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26847#249_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/88654
dc.description.abstractLarge specimens of an ASTM E-373-58T steel were subjected to zero-tension cyclic loading, hence with nonzero mean stress, under a repeated programmed pattern of nine stress levels. With the major stress twice the minor stress, the levels in the loading pattern were chosen in such a manner that they had approximately a sinusoidal wave as an envelope and the stress cycle at each step was repeated 500 times. The experimental results show a trend of variation of the cycle-ratio summation similar to that obtained on tests with zero mean stress; the higher the number of stress levels in the loading pattern below the original endurance limit, the larger the deviation from unity of this summation. A comparison is made between the predicted lives according to the linear cumulative damage rule and according to an alternative theory which takes into account the variation of the endurance limit (Unified Theory). It is found that the Unified Theory is more conservative and provides better estimates in the high-cycle range in particular for cases where there are, in the stress pattern, several levels lower than the endurance limit of the original material.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCumulative Fatigue Damage on Large Steel Specimens Under Axial Programmed Loading With Nonzero Mean Stress
dc.typeJournal Paper
dc.journal.volume98
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443375
dc.journal.fristpage249
dc.journal.lastpage255
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsStress
dc.keywordsFatigue damage
dc.keywordsCycles
dc.keywordsEndurance limit
dc.keywordsUnified field theories
dc.keywordsWaves
dc.keywordsTension AND ASTM International
dc.treeJournal of Engineering Materials and Technology:;1976:;volume( 098 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record