Show simple item record

dc.contributor.authorL. A. James
dc.date.accessioned2017-05-08T23:00:43Z
dc.date.available2017-05-08T23:00:43Z
dc.date.copyrightJuly, 1976
dc.date.issued1976
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26847#235_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/88652
dc.description.abstractData are presented from fatigue-crack growth tests conducted on Type 304 S.S. in inert environments at elevated temperatures which show that the thermal-activation noted in similar tests run in air environments is not present in the inert environment. Similar observations from the literature are reviewed, including the observation that the time-dependency noted in tests conducted in elevated temperature air environments is also greatly suppressed in inert environments. These findings suggest that an interaction between the fatigue process and the corrosive air environments is responsible for the thermally-activated time-dependent behavior often attributed to creep-fatigue interaction. Data are also presented which show that the fatigue-crack growth behavior of Type 304 S.S. subjected to significant creep damage prior to fatigue testing does not differ appreciably from the behavior of material not subjected to prior creep damage; again indicating minimal interaction between creep and fatigue. It is suggested that in the temperature range where pressure vessels and piping are generally designed to operate (i.e. below about one-half the absolute melting temperature of the alloy), the interaction between creep and fatigue is far less significant than once supposed, and that the major parameter interacting with the fatigue process is that of high temperature corrosion.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSome Questions Regarding the Interaction of Creep and Fatigue
dc.typeJournal Paper
dc.journal.volume98
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443373
dc.journal.fristpage235
dc.journal.lastpage243
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsFatigue
dc.keywordsTemperature
dc.keywordsFatigue cracks
dc.keywordsFatigue testing
dc.keywordsHigh temperature
dc.keywordsAlloys
dc.keywordsPressure vessels
dc.keywordsMelting
dc.keywordsCorrosion AND Pipes
dc.treeJournal of Engineering Materials and Technology:;1976:;volume( 098 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record