Show simple item record

dc.contributor.authorR. L. Klueh
dc.contributor.authorR. E. Oakes
dc.date.accessioned2017-05-08T23:00:42Z
dc.date.available2017-05-08T23:00:42Z
dc.date.copyrightOctober, 1976
dc.date.issued1976
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26848#361_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/88641
dc.description.abstractThe high strain rate tensile properties of annealed 2 1/4 Cr-1 Mo steel were determined and the tensile behavior from 25 to 566°C and strain rates of 2.67 × 10−6 to 144/s were described. Above 0.1/s at 25°C, both the yield stress and the ultimate tensile strength increased rapidly with increasing strain rate. As the temperature was increased, a dynamic strain aging peak appeared in the ultimate tensile strength-temperature curves. The peak height was a maximum at about 350°C and 2.67 × 10−6 /s. With increasing strain rate, a peak of decreased height occurred at progressively higher temperatures. The major effect of strain rate on ductility occurred at elevated temperatures, where a decrease in strain rate caused an increase in total elongation and reduction in area.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHigh Strain Rate Tensile Properties of Annealed 2 1/4 Cr-1 Mo Steel
dc.typeJournal Paper
dc.journal.volume98
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443390
dc.journal.fristpage361
dc.journal.lastpage368
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsTemperature
dc.keywordsDuctility
dc.keywordsElongation
dc.keywordsTensile strength AND Yield stress
dc.treeJournal of Engineering Materials and Technology:;1976:;volume( 098 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record