Show simple item record

dc.contributor.authorJ. M. Steichen
dc.date.accessioned2017-05-08T23:00:42Z
dc.date.available2017-05-08T23:00:42Z
dc.date.copyrightOctober, 1976
dc.date.issued1976
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26848#357_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/88640
dc.description.abstractThe influence of thermal exposure at 800, 1000, and 1200°F (427, 538 and 649°C) on the tensile properties of type 304 stainless steel has been experimentally determined. Specimens were exposed in static sodium for durations of 1000, 3500 and 10,000 hr. Tests were performed at room temperature and the respective exposure temperatures at nominal strain rates from 3 × 10−5 to 10 s−1 . Exposure at temperatures to 1000°F (538°C) did not greatly alter the elevated temperature strength, ductility, or strain rate sensitivity of the subject material. At 1200°F (649°C) strength properties were unchanged by exposure at this temperature while ductility was increased at the lowest strain rate and slightly reduced at the higher rates. The room temperature strength was unchanged and ductility slightly reduced after exposure for 10,000 hr at each temperature.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTensile Properties of Thermally Exposed Type 304 Stainless Steel
dc.typeJournal Paper
dc.journal.volume98
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443389
dc.journal.fristpage357
dc.journal.lastpage360
dc.identifier.eissn1528-8889
dc.keywordsStainless steel
dc.keywordsTemperature
dc.keywordsDuctility AND Sodium
dc.treeJournal of Engineering Materials and Technology:;1976:;volume( 098 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record