Show simple item record

dc.contributor.authorA. Coles
dc.contributor.authorR. E. Johnson
dc.contributor.authorH. G. Popp
dc.date.accessioned2017-05-08T23:00:42Z
dc.date.available2017-05-08T23:00:42Z
dc.date.copyrightOctober, 1976
dc.date.issued1976
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26848#305_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/88632
dc.description.abstractSurface-flawed tensile bar specimens were developed and tested to investigate the applicability of fracture mechanics to relatively small crack sizes under varying stress-time-temperature conditions and to derive ths stress intensity relationships for such surface cracks. The geometric influences on continuous cycling, as well as time-dependent, creep/fatigue, crack propagation were observed and characterized for Inconel 718. The influence of stress ratio on cyclic crack growth rate curves was examined, and the equivalent stress intensity concept was substantiated. A residual life calculation method was developed, and verification test results were obtained wherein equal accuracy in calculated lives (following precracking) was observed for flat tensile specimens and simple cylindrical rotating disks. The verification tests established the viability of the elastic fracture mechanics method for predicting crack growth under conditions near the elastic/plastic limit, provided that pertinent material data are used and careful attention is paid to stress redistribution.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleUtility of Surface-Flawed Tensile Bars in Cyclic Life Studies
dc.typeJournal Paper
dc.journal.volume98
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443382
dc.journal.fristpage305
dc.journal.lastpage315
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsFracture mechanics
dc.keywordsTemperature
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsFatigue cracks
dc.keywordsRotating Disks AND Surface cracks
dc.treeJournal of Engineering Materials and Technology:;1976:;volume( 098 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record