Show simple item record

dc.contributor.authorE. Friedman
dc.date.accessioned2017-05-08T22:59:36Z
dc.date.available2017-05-08T22:59:36Z
dc.date.copyrightAugust, 1975
dc.date.issued1975
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28120#206_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/88008
dc.description.abstractAnalytical models are developed for calculating temperatures, stresses and distortions resulting from the welding process. The models are implemented in finite element formulations and applied to a longitudinal butt weld. Nonuniform temperature transients are shown to result in the characteristic transverse bending distortions. Residual stresses are greatest in the weld metal and heat-affected zones, while the accumulated plastic strain is maximum at the interface of these two zones on the underside of the weldment.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThermomechanical Analysis of the Welding Process Using the Finite Element Method
dc.typeJournal Paper
dc.journal.volume97
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454296
dc.journal.fristpage206
dc.journal.lastpage213
dc.identifier.eissn1528-8978
dc.keywordsWelding
dc.keywordsFinite element methods
dc.keywordsTemperature
dc.keywordsMetals
dc.keywordsResidual stresses
dc.keywordsStress
dc.keywordsFinite element analysis AND Heat
dc.treeJournal of Pressure Vessel Technology:;1975:;volume( 097 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record