Show simple item record

dc.contributor.authorD. P. Jones
dc.date.accessioned2017-05-08T22:59:36Z
dc.date.available2017-05-08T22:59:36Z
dc.date.copyrightAugust, 1975
dc.date.issued1975
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28120#199_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/88007
dc.description.abstractTwo- and three-dimensional finite element models were used to determine elastic stress distributions in plate ligaments for various in-plane, bending, and thermal loadings. Plates containing triangular penetration patterns of 5 and 10 percent ligament efficiency were analyzed as well as the example of a circular plate containing a single centrally placed hole subjected to step change in temperature on one surface. Detailed descriptions of boundary conditions are given with the results presented in terms of stresses important in tubesheet and vessel closure design considerations. Results show that the minimum ligament section of the perforated region need not be the critically stressed cross section as is currently assumed in the ASME Boiler and Pressure Vessel Code. Further, a thermal shock ΔT applied to the surface of a perforated region will result in a maximum peak stress of EαΔT/(1−ν) and may be significantly lower than the thermal skin stress calculated by the ASME Code procedures.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFinite Element Analysis of Perforated Plates Containing Triangular Penetration Patterns of 5 and 10 Percent Ligament Efficiency
dc.typeJournal Paper
dc.journal.volume97
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454295
dc.journal.fristpage199
dc.journal.lastpage205
dc.identifier.eissn1528-8978
dc.keywordsFinite element analysis
dc.keywordsPlates (structures)
dc.keywordsStress
dc.keywordsDesign
dc.keywordsTemperature
dc.keywordsASME Boiler and Pressure Vessel Code
dc.keywordsBoundary-value problems
dc.keywordsFinite element model
dc.keywordsSkin
dc.keywordsThermal shock
dc.keywordsVessels AND ASME Standards
dc.treeJournal of Pressure Vessel Technology:;1975:;volume( 097 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record