Show simple item record

dc.contributor.authorT. Belytschko
dc.contributor.authorJ. M. Kennedy
dc.date.accessioned2017-05-08T22:59:36Z
dc.date.available2017-05-08T22:59:36Z
dc.date.copyrightAugust, 1975
dc.date.issued1975
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28120#172_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/88003
dc.description.abstractThe attenuation of pressure waves by the subassembly walls in a reactor core was studied by a two dimensional, finite element program. For these purposes, a hydro-dynamic finite element was incorporated in an existing dynamic structural program. The resulting program has the advantage that complex boundary conditions and the interaction of structural and fluid elements are handled in a straightforward manner. The program was used to model a section of the hexcan and the surrounding fluid; the hexcan was modelled by beam elements. It is shown that the hexcan walls attenuate pressure peaks by about 33 percent in the adjacent subassembly. Thus the subassembly walls may play an important role in confining the effects of local accidents.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFinite Element Study of Pressure Wave Attenuation by Reactor Fuel Subassemblies
dc.typeJournal Paper
dc.journal.volume97
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454291
dc.journal.fristpage172
dc.journal.lastpage177
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsWaves
dc.keywordsFinite element analysis
dc.keywordsNuclear fuels
dc.keywordsFluids
dc.keywordsAccidents AND Boundary-value problems
dc.treeJournal of Pressure Vessel Technology:;1975:;volume( 097 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record