Show simple item record

dc.contributor.authorS. Y. Zamrik
dc.contributor.authorF. M. Bahgat
dc.date.accessioned2017-05-08T22:59:35Z
dc.date.available2017-05-08T22:59:35Z
dc.date.copyrightNovember, 1975
dc.date.issued1975
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28122#284_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/87993
dc.description.abstractThe J-integral approach was applied to plates containing surface flaws type of cracks. The experimental procedure followed in this investigation was based on a proposed method by Begley and Landes that utilizes a resistance “R” type curve to find a critical value of J for specimens containing straight cracks. Furthermore, the Begley-Landes procedure was modified to consider the incremental growth of the crack frontal area due to static loading. An interpolation process was used for estimating average values of Jc and Kc for crack geometries which lie between those obtained experimentally. Moreover, a shape correction factor was obtained which shows the dependence of the average value of the stress intensity factor, Kc , on the crack geometry and the relative crack-to-specimen dimensions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA J-Integral Analysis to Fracture Toughness of Plates Containing Surface Cracks
dc.typeJournal Paper
dc.journal.volume97
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454309
dc.journal.fristpage284
dc.journal.lastpage290
dc.identifier.eissn1528-8978
dc.keywordsPlates (structures)
dc.keywordsFracture toughness
dc.keywordsSurface cracks
dc.keywordsFracture (Materials)
dc.keywordsDimensions
dc.keywordsElectrical resistance
dc.keywordsStress
dc.keywordsGeometry
dc.keywordsInterpolation AND Shapes
dc.treeJournal of Pressure Vessel Technology:;1975:;volume( 097 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record