Show simple item record

dc.contributor.authorW. G. Gibbons
dc.contributor.authorW. R. Andrews
dc.contributor.authorG. A. Clarke
dc.date.accessioned2017-05-08T22:59:35Z
dc.date.available2017-05-08T22:59:35Z
dc.date.copyrightNovember, 1975
dc.date.issued1975
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28122#270_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/87991
dc.description.abstractA testing program has been run using off-centered-cracked (OCC) plate specimens to demonstrate the fracture characteristics of tunnel defects in specimens with various ligament lengths between the near surface crack tip and a free surface. Measured strain values and the fracture results compared favorably with theory up to the limits of the analyses. An empirical equation which calculates the near surface stress intensity provides extended calculational capabilities. In addition, fatigue crack growth and fracture velocities plus fracture toughness were measured for a Cr-Mo-V steel.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFracture of Defects Approaching a Free Surface
dc.typeJournal Paper
dc.journal.volume97
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454307
dc.journal.fristpage270
dc.journal.lastpage277
dc.identifier.eissn1528-8978
dc.keywordsFracture (Process)
dc.keywordsProduct quality
dc.keywordsStress
dc.keywordsSteel
dc.keywordsTesting
dc.keywordsEquations
dc.keywordsFatigue cracks
dc.keywordsFracture toughness
dc.keywordsSurface cracks AND Tunnels
dc.treeJournal of Pressure Vessel Technology:;1975:;volume( 097 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record