Show simple item record

dc.contributor.authorF. V. Ellis
dc.contributor.authorB. W. Roberts
dc.contributor.authorJ. E. Bynum
dc.date.accessioned2017-05-08T22:59:34Z
dc.date.available2017-05-08T22:59:34Z
dc.date.copyrightNovember, 1975
dc.date.issued1975
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28122#258_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/87988
dc.description.abstractThis paper describes an investigation of the tensile and creep properties of annealed 9 Cr-1 Mo steel. Tensile tests were conducted at temperatures from 70 to 1050 F while creep tests were conducted at 750, 850, 950, and 1050 F with stresses from 4 to 52 ksi. From the tensile test data, a constitutive equation was developed for the stress-plastic strain relationship. This equation was based on a two-stage hardening mechanism and combined power law and exponential functions. From the creep test data, isochronous stress-strain curves were constructed out to 104 hr. These curves were extrapolated to 105 hr and to lower stresses using a parametric analysis procedure. Additionally, a creep constitutive equation capable of describing the total creep curve, including the tertiary region, was developed. This equation, having three stress and temperature dependent parameters predicted creep curves which were in good agreement with the actual curves. Both the time-independent (tensile) and time-dependent (creep) constitutive equations are suitable for use in finite element stress analysis computer programs.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleConstitutive Equations for Tensile and Creep Behavior of a 9 Cr-1 MO Steel
dc.typeJournal Paper
dc.journal.volume97
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454305
dc.journal.fristpage258
dc.journal.lastpage263
dc.identifier.eissn1528-8978
dc.keywordsSteel
dc.keywordsCreep
dc.keywordsConstitutive equations
dc.keywordsStress
dc.keywordsEquations
dc.keywordsTemperature
dc.keywordsFinite element analysis
dc.keywordsComputer software
dc.keywordsHardening
dc.keywordsStress analysis (Engineering)
dc.keywordsStress-strain curves
dc.keywordsFunctions AND Mechanisms
dc.treeJournal of Pressure Vessel Technology:;1975:;volume( 097 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record