Show simple item record

dc.contributor.authorT. Muraki
dc.contributor.authorJ. J. Bryan
dc.contributor.authorK. Masubuchi
dc.date.accessioned2017-05-08T22:58:45Z
dc.date.available2017-05-08T22:58:45Z
dc.date.copyrightJanuary, 1975
dc.date.issued1975
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26839#85_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/87558
dc.description.abstractThis is the second part of a study of thermal stresses and metal movement during welding. Part I described the finite-element analysis of two-dimensional thermal stresses and metal movement during bead-on-plate and butt welding. Part II presents results of experiments on bead-on-plate and butt welds in 6061-T6 aluminum alloy. Measurements were made of changes of temperature, thermal strains, and metal movement during welding. The paper then compares experimental data with analytical results. Good agreements were obtained between experimental and analytical results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalysis of Thermal Stresses and Metal Movement During Welding—Part II: Comparison of Experimental Data and Analytical Results
dc.typeJournal Paper
dc.journal.volume97
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443266
dc.journal.fristpage85
dc.journal.lastpage91
dc.identifier.eissn1528-8889
dc.keywordsMetals
dc.keywordsWelding
dc.keywordsThermal stresses
dc.keywordsWelded joints
dc.keywordsFinite element analysis
dc.keywordsButt welding
dc.keywordsAluminum alloys
dc.keywordsMeasurement AND Temperature
dc.treeJournal of Engineering Materials and Technology:;1975:;volume( 097 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record