Show simple item record

dc.contributor.authorT. C. Hsu
dc.contributor.authorH. M. Shang
dc.contributor.authorT. C. Lee
dc.contributor.authorS. Y. Lee
dc.date.accessioned2017-05-08T22:58:45Z
dc.date.available2017-05-08T22:58:45Z
dc.date.copyrightJanuary, 1975
dc.date.issued1975
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26839#57_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/87553
dc.description.abstractThe relationship between the geometry and the membrane stresses of a thin shell under internal or external pressure is analyzed through the concept of prolateness. Prolateness is a quantitative measure of the local deviation from the spherical surface and it varies in a complex manner throughout a thin shell formed by hydraulic pressure. It is found that for the metals tested the surface is locally a sphere only at the pole and at an annular ring; elsewhere, it is oblate or prolate. The stress distributions in the shell being formed are also determined. Their variation as the forming progresses reveals that the material deforms quite differently at the beginning and at the end of the process.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFlow Stresses in Sheet Material Formed Into Nearly Spherical Shapes
dc.typeJournal Paper
dc.journal.volume97
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443262
dc.journal.fristpage57
dc.journal.lastpage65
dc.identifier.eissn1528-8889
dc.keywordsStress
dc.keywordsFlow (Dynamics)
dc.keywordsShapes
dc.keywordsSheet materials
dc.keywordsThin shells
dc.keywordsPressure
dc.keywordsShells
dc.keywordsMetals
dc.keywordsPoles (Building)
dc.keywordsExternal pressure
dc.keywordsGeometry AND Membranes
dc.treeJournal of Engineering Materials and Technology:;1975:;volume( 097 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record