Show simple item record

dc.contributor.authorP. J. Cain
dc.contributor.authorT. E. Hutchinson
dc.contributor.authorR. Plunkett
dc.date.accessioned2017-05-08T22:58:44Z
dc.date.available2017-05-08T22:58:44Z
dc.date.copyrightApril, 1975
dc.date.issued1975
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26840#179_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/87539
dc.description.abstractFlat sheet stock of 2024-T3 Duralumin was tested for fatigue crack propagation in simple bending. Transcrystalline cracking was observed at a rate proportional to stress intensity factor squared at low levels where the plastic zone is less than grain size. A mixture of trans-and-intercrystalline cracking was observed at a rate proportional to stress intensity factor to the fourth power at high levels where the plastic zone is larger than grain size. A strain redistribution mechanism giving constant stress intensity factor through the thickness is postulated. The combination of strain redistribution in bending and change of mechanism with plastic zone size leads to a macroscopic behavior which is different from that previously reported for simple tension, particularly in mild steel.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue Crack Propagation Rates for Duralumin in Simple Bending
dc.typeJournal Paper
dc.journal.volume97
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443279
dc.journal.fristpage179
dc.journal.lastpage186
dc.identifier.eissn1528-8889
dc.keywordsFatigue cracks
dc.keywordsStress
dc.keywordsFracture (Process)
dc.keywordsMechanisms
dc.keywordsGrain size
dc.keywordsMixtures
dc.keywordsTension
dc.keywordsThickness AND Steel
dc.treeJournal of Engineering Materials and Technology:;1975:;volume( 097 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record