Show simple item record

dc.contributor.authorT. Wada
dc.contributor.authorD. L. Sponseller
dc.date.accessioned2017-05-08T22:58:42Z
dc.date.available2017-05-08T22:58:42Z
dc.date.copyrightJuly, 1975
dc.date.issued1975
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26841#234_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/87515
dc.description.abstractA laboratory heat of an improved boiler steel containing 0.13 percent C, 1.36 percent Mn, 0.27 percent Mo, 0.03 percent Cb, and 0.010 percent N was prepared; creep-rupture properties, resistance to temper embrittlement and resistance to hydrogen attack were investigated. The rupture strength was much higher than that of carbon steel and columbium-treated carbon steel, but was somewhat lower than that of two European carbon-0.3 percent Mo boiler steels. Creep-rupture ductility was high. The experimental steel exhibited high toughness, especially in the normalized and stress-relieved condition. No temper embrittlement was induced by step-cooling normalized or normalized and stress-relieved material. Good resistance to hydrogen attack was revealed by tests in a hydrogen autoclave at a pressure of 1000 psi (6.9 N/mm2 ); the steel retained the original Charpy impact toughness after exposures up to 5000 hr at 900 deg F (480 deg C) and 500 hr at 1000 deg F (540 deg C). No blistering or fissuring were observed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCreep-Rupture Properties, Resistance to Temper Embrittlement and to Attack by Hydrogen of a 1.4 Percent Mn — 0.25 Percent Mo — 0.03 Percent Cb Steel
dc.typeJournal Paper
dc.journal.volume97
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443290
dc.journal.fristpage234
dc.journal.lastpage244
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsElectrical resistance
dc.keywordsCreep
dc.keywordsEmbrittlement
dc.keywordsHydrogen
dc.keywordsRupture
dc.keywordsToughness
dc.keywordsBoilers
dc.keywordsCarbon steel
dc.keywordsStress
dc.keywordsDuctility
dc.keywordsCarbon
dc.keywordsHeat
dc.keywordsCooling AND Pressure
dc.treeJournal of Engineering Materials and Technology:;1975:;volume( 097 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record