Show simple item record

dc.contributor.authorD. J. Wilson
dc.date.accessioned2017-05-08T22:58:41Z
dc.date.available2017-05-08T22:58:41Z
dc.date.copyrightJuly, 1975
dc.date.issued1975
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26841#223_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/87514
dc.description.abstractTime-dependent notch sensitivity of Udimet 700 sheet, bar, and investment castings was observed between 1000 deg and 1400 deg F (538–760 deg C) but not at 1600 deg F (871 deg C). As was the case for Modified Waspaloy, Waspaloy, René 41, INCONEL 718 and TD-NiCr, it occurred when notched specimens were loaded below the yield strength and when creep deformation was localized. For each γ′ strengthened alloy and notched specimen geometry, a stress-average particle size zone can be defined to characterize the notch sensitive behavior.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDeformation Characteristics and Time-Dependent Notch Sensitivity of Udimet 700 at Intermediate Temperatures
dc.typeJournal Paper
dc.journal.volume97
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443289
dc.journal.fristpage223
dc.journal.lastpage233
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsCreep
dc.keywordsTemperature
dc.keywordsAlloys
dc.keywordsStress
dc.keywordsInvestment castings
dc.keywordsGeometry
dc.keywordsParticle size AND Yield strength
dc.treeJournal of Engineering Materials and Technology:;1975:;volume( 097 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record