Show simple item record

dc.contributor.authorJ. A. Williams
dc.contributor.authorA. T. Price
dc.date.accessioned2017-05-08T22:58:41Z
dc.date.available2017-05-08T22:58:41Z
dc.date.copyrightJuly, 1975
dc.date.issued1975
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26841#214_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/87512
dc.description.abstractMethods previously used to describe crack growth under creep conditions are reviewed. Under some conditions, materials can be notch insensitive and a model is developed based on engineering analyses of creeping structures using reference or skeletal point stresses. This stress, dependent on crack length and geometry, is derived for conventional test pieces. Examination of the relaxed stress distributions around stress concentrations suggests that the behavior of cracked structures is dependent on the total creep strain/stress index, p. Two categories of materials behavior are distinguished: when p>5, the reference stress description should be applicable and when p→1, the stress intensity factor description appears appropriate. Finally, the general applicability of the model is discussed with respect to the metallurgical aspects of creep damage accumulation, suggesting that crack initiation may dominate life when p>5 and crack growth when p→1. A comparison is then made with previous experimental data.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Description of Crack Growth From Defects Under Creep Conditions
dc.typeJournal Paper
dc.journal.volume97
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443288
dc.journal.fristpage214
dc.journal.lastpage222
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsProduct quality
dc.keywordsFracture (Materials)
dc.keywordsStress AND Geometry
dc.treeJournal of Engineering Materials and Technology:;1975:;volume( 097 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record