Show simple item record

dc.contributor.authorO. Vosikovsky
dc.date.accessioned2017-05-08T22:58:39Z
dc.date.available2017-05-08T22:58:39Z
dc.date.copyrightOctober, 1975
dc.date.issued1975
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26843#298_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/87493
dc.description.abstractThe effects of salt and distilled water environments on fatigue-crack growth rates have been evaluated for an X-65 line-pipe steel. Tests were conducted over a frequency range between 10 and 0.01 Hz, under conditions of cathodic potential and free corrosion. A distinct pattern in the functional dependence of growth rates on ΔK and frequency has been found. Maximum environmental enhancement of growth rates was 50 times that of air at a cathodic potential of −1.04V, and 10 times that of air at a free-corrosion potential of −0.68V. In each case it occurred at the lowest frequency and at relatively high values of ΔK. Hydrogen embrittlement and the two-stage cracking process are examined as the main mechanisms of growth acceleration.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue-Crack Growth in an X-65 Line-Pipe Steel at Low Cyclic Frequencies in Aqueous Environments
dc.typeJournal Paper
dc.journal.volume97
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443302
dc.journal.fristpage298
dc.journal.lastpage304
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsPipes
dc.keywordsFatigue cracks
dc.keywordsFrequency
dc.keywordsCorrosion
dc.keywordsHydrogen
dc.keywordsWater
dc.keywordsMechanisms
dc.keywordsEmbrittlement AND Cracking (Materials)
dc.treeJournal of Engineering Materials and Technology:;1975:;volume( 097 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record