Show simple item record

dc.contributor.authorA. Carpinteri
dc.contributor.authorM. Paggi
dc.date.accessioned2017-05-08T22:41:39Z
dc.date.available2017-05-08T22:41:39Z
dc.date.copyrightFebruary 2010
dc.date.issued2010
dc.identifier.other%28asce%290733-9399%282010%29136%3A2%28199%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/86729
dc.description.abstractThe problem of end-plate debonding of the external reinforcement in strengthened concrete beams is analyzed in this paper. As experimentally observed, this mode of failure is highly brittle and poses severe limitations to the efficacy of the strengthening technique. A numerical analysis of the full-range behavior of strengthened beams in bending is herein proposed to study the stages of nucleation and propagation of interfacial cracks between the external reinforcement and the concrete substrate. This is achieved by modeling the nonlinear interface behavior according to a cohesive law accounting for Mode Mixity. The numerically obtained load versus midspan deflection curves for three- or four-point bending beams show that the process of end-plate debonding is the result of a snap-back instability, which is fully interpreted in the framework of the Catastrophe Theory. To capture the softening branch with positive slope, the interface crack-length control scheme is proposed in the numerical simulations. The results of a wide parametric study exploring the effect of the relative reinforcement length, the mechanical percentage of fiber-reinforced polymer sheets, the beam slenderness, and the ratio between Mode II and Mode I fracture energies are collected in useful diagrams. Finally, an experimental assessment of the proposed model completes the paper.
dc.publisherAmerican Society of Civil Engineers
dc.titleAnalysis of Snap-Back Instability due to End-Plate Debonding in Strengthened Beams
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue2
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2010)136:2(199)
dc.treeJournal of Engineering Mechanics:;2010:;Volume ( 136 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record