Show simple item record

dc.contributor.authorMatthew R. Kuhn
dc.contributor.authorKatalin Bagi
dc.date.accessioned2017-05-08T22:41:35Z
dc.date.available2017-05-08T22:41:35Z
dc.date.copyrightJune 2009
dc.date.issued2009
dc.identifier.other%28asce%290733-9399%282009%29135%3A6%28485%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/86681
dc.description.abstractThe paper addresses the question of whether the number of particles in a noncemented granular assembly will affect the mechanical characteristics of the assembly: its strength and stiffness. The question is answered by applying the discrete element method to assemblies of different sizes. To isolate the effect of assembly size, apart from the scatter that usually accompanies such simulations, multiple assemblies were tested. The two-dimensional assemblies had nearly identical initial porosities and fabrics, and they were all loaded in biaxial compression. Two different boundaries were tested: periodic and wall boundaries. We find that the peak compressive strength decreases with assembly size for both types of boundaries and over a range of assembly sizes that contain 256 particles to over 66,000 particles. Stiffness is only slightly reduced and only with wall boundaries. Deformation is less uniform in the larger assemblies, with deformation concentrated in a smaller fraction of the assembly area. An analysis of deformation patterning shows that at least a few thousand particles are required for realistic microband patterning.
dc.publisherAmerican Society of Civil Engineers
dc.titleSpecimen Size Effect in Discrete Element Simulations of Granular Assemblies
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue6
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2009)135:6(485)
dc.treeJournal of Engineering Mechanics:;2009:;Volume ( 135 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record