Show simple item record

dc.contributor.authorHong-Nan Li
dc.contributor.authorGuang-Dong Zhou
dc.contributor.authorLiang Ren
dc.contributor.authorDong-Sheng Li
dc.date.accessioned2017-05-08T22:41:29Z
dc.date.available2017-05-08T22:41:29Z
dc.date.copyrightDecember 2009
dc.date.issued2009
dc.identifier.other%28asce%290733-9399%282009%29135%3A12%281343%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/86631
dc.description.abstractFiber Bragg grating (FBG) sensors have attracted a considerable amount of interest for their superior characteristics. However, the FBG sensors made on bare fibers are easily damaged. For their safe use in engineering, the glass core of optical fibers is coated with softer low modulus protective coatings. A portion of the host material strain is absorbed by the protective coatings when the strain transfers from the host material to the fiber core, and hence only a segment of structural strain is sensed. By introducing the shear modulus of the host material, a novel analytical model is developed for evaluating the sensing strain of the embedded FBG sensors in composite structures based on the strain in a host material. The average strain transfer ratio is deduced to describe the percentage transferred to the optical fiber core from the host material. It is concluded that the shear modulus of the host material influences strain transmission, especially when it is much lower than the modulus of the fiber core. Then, the strain transfer ratio of an optical fiber sensor embedded in a multilayered structure is developed in a similar way. The factors that affect the efficiency of strain transfer on the optical fiber sensor are deduced and discussed in detail based on the theoretical analysis. Finally, the theoretical results are verified through laboratory experimentation with the FBG sensors.
dc.publisherAmerican Society of Civil Engineers
dc.titleStrain Transfer Coefficient Analyses for Embedded Fiber Bragg Grating Sensors in Different Host Materials
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue12
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2009)135:12(1343)
dc.treeJournal of Engineering Mechanics:;2009:;Volume ( 135 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record