Show simple item record

dc.contributor.authorInho Hwang
dc.contributor.authorJong Seh Lee
dc.contributor.authorB. F. Spencer Jr.
dc.date.accessioned2017-05-08T22:41:27Z
dc.date.available2017-05-08T22:41:27Z
dc.date.copyrightJanuary 2009
dc.date.issued2009
dc.identifier.other%28asce%290733-9399%282009%29135%3A1%2862%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/86608
dc.description.abstractRain-wind induced cable vibration can cause serious problems in cable-stayed bridges. Externally attached dampers have been used to provide an effective means to suppress the vibration of relatively short stay cables. For very long stay cables, however, such damper systems are rendered ineffective, as the dampers need be attached near the end of the cables for aesthetic reasons. This paper investigates a new stay-cable isolation system to mitigate the cable vibration. The proposed isolation system, which consists of a laminated rubber bearing and an internal damper, may be installed inside of the cable anchorage. A simple analytical model of the cable-damper system is developed first based on the taut string representation of the cable. The response of a cable with the proposed isolation system is obtained and then compared to those of the cable with and without an external passive damper. The proposed stay-cable isolation system is shown to perform better than the optimal passive viscous damper, thereby demonstrating its applicability in large cable-stayed bridges.
dc.publisherAmerican Society of Civil Engineers
dc.titleIsolation System for Vibration Control of Stay Cables
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue1
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2009)135:1(62)
dc.treeJournal of Engineering Mechanics:;2009:;Volume ( 135 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record