Show simple item record

dc.contributor.authorBernd Koeberl
dc.contributor.authorKaspar Willam
dc.date.accessioned2017-05-08T22:41:24Z
dc.date.available2017-05-08T22:41:24Z
dc.date.copyrightSeptember 2008
dc.date.issued2008
dc.identifier.other%28asce%290733-9399%282008%29134%3A9%28804%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/86602
dc.description.abstractStress transfer from concrete into steel is one of the fundamental mechanisms behind the significant ductility of reinforced concrete. Considering the low value of cracking strain of plain concrete, it is the stress transfer that takes place during debonding when the steel strain approaches the yield limit at a level which is an order of magnitude larger than the cracking limit of concrete. This technical note examines the difference of “tension softening” of plain concrete versus “tension stiffening” of reinforced concrete which describes the stress transfer mechanism from concrete into the embedded reinforcing bars. Using three-dimensional finite-element simulations the fracture energy arguments of Mode I versus Mode II are reexamined when the axial response behavior of plain concrete in tension softening is compared with that of reinforced concrete exhibiting tension stiffening in long and short tension members.
dc.publisherAmerican Society of Civil Engineers
dc.titleQuestion of Tension Softening versus Tension Stiffening in Plain and Reinforced Concrete
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue9
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2008)134:9(804)
dc.treeJournal of Engineering Mechanics:;2008:;Volume ( 134 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record