Show simple item record

dc.contributor.authorTsung-Hui Kuo
dc.contributor.authorHuang Hsing Pan
dc.contributor.authorGeorge J. Weng
dc.date.accessioned2017-05-08T22:41:19Z
dc.date.available2017-05-08T22:41:19Z
dc.date.copyrightDecember 2008
dc.date.issued2008
dc.identifier.other%28asce%290733-9399%282008%29134%3A12%281045%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/86516
dc.description.abstractA micromechanics-based model is proposed to determine the nonlinear stress-strain relations of cement-matrix composites at different concentrations of inclusions (aggregates). We first conducted some experiments to uncover the stress-strain behavior of the cement paste with a water-to-cement ratio of 0.45, and those of the mortar with the same cement paste but at three different volume concentrations of aggregates. The behavior of the cement paste is then simulated by Burgers’ rheological model. In the development of the composite model, we extend the linear elastic response to the nonlinear one through the replacement of elastic moduli by the corresponding secant moduli. The nonlinear stress-strain curves of the cement-matrix composite are then determined from those of the cement paste and inclusions. It is shown that the predicted stress-strain curves of the mortar are in close agreement with the experimental curves up to an aggregate volume fraction of 49% or
dc.publisherAmerican Society of Civil Engineers
dc.titleMicromechanics-Based Predictions on the Overall Stress-Strain Relations of Cement-Matrix Composites
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue12
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2008)134:12(1045)
dc.treeJournal of Engineering Mechanics:;2008:;Volume ( 134 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record