Show simple item record

dc.contributor.authorAdam J. Rinehart
dc.contributor.authorPeter B. Keating
dc.date.accessioned2017-05-08T22:41:14Z
dc.date.available2017-05-08T22:41:14Z
dc.date.copyrightJuly 2007
dc.date.issued2007
dc.identifier.other%28asce%290733-9399%282007%29133%3A7%28792%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/86448
dc.description.abstractDent imperfections in internally pressurized shells have a stress concentration effect. In cylindrical shells under internal pressure, such as pipelines, stress concentrations associated with dent imperfections can degrade in-service performance. A new semianalytical solution is developed for the stress concentration distribution present along the two-dimensional circumferential cross section of a cylinder under internal pressure containing a local dent-like imperfection. An equivalent load approach is used. Results are compared against finite-element results. For practical application, the stress concentration factor (SCF) present at the outer surface of the dent center is derived. Parametric studies with this expression show that long dent stress concentrations are primarily influenced by the dent depth-pipe thickness and the dent depth-pipe diameter ratios. Example cases show that SCF values between 10.0 and 20.0 are possible and that even shallow dent SCFs can be above 2.0.
dc.publisherAmerican Society of Civil Engineers
dc.titleStress Concentration Solution for a 2D Dent in an Internally Pressurized Cylinder
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue7
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2007)133:7(792)
dc.treeJournal of Engineering Mechanics:;2007:;Volume ( 133 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record