Show simple item record

dc.contributor.authorShuenn-Yih Chang
dc.date.accessioned2017-05-08T22:41:11Z
dc.date.available2017-05-08T22:41:11Z
dc.date.copyrightMay 2007
dc.date.issued2007
dc.identifier.other%28asce%290733-9399%282007%29133%3A5%28555%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/86422
dc.description.abstractIt was found that the discontinuity at the end of an impulse will lead to numerical inaccuracy as this discontinuity will result in an extra impulse and thus an extra displacement in the time history analysis. In addition, this extra impulse is proportional to the discontinuity value at the end of the impulse and the size of integration time step. To overcome this difficulty, an effective approach is proposed to reduce the extra impulse and hence the extra displacement. In fact, the novel approach proposed in this paper is to perform a single small time step immediately upon the termination of applied impulse, whereas other time steps can be conducted by using the step size determined from accuracy consideration in period. The feasibility of this approach is analytically explored. Further, analytical results are confirmed by numerical examples. Numerical studies also show that this approach can be applied to other step-by-step integration methods. It seems that to slightly complicate the programming of dynamic analysis codes is the only disadvantage of this approach.
dc.publisherAmerican Society of Civil Engineers
dc.titleApproach for Overcoming Numerical Inaccuracy Caused by Load Discontinuity
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue5
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2007)133:5(555)
dc.treeJournal of Engineering Mechanics:;2007:;Volume ( 133 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record