Show simple item record

dc.contributor.authorA. Krusper
dc.contributor.authorP. Isaksson
dc.contributor.authorP. Gradin
dc.date.accessioned2017-05-08T22:41:04Z
dc.date.available2017-05-08T22:41:04Z
dc.date.copyrightNovember 2007
dc.date.issued2007
dc.identifier.other%28asce%290733-9399%282007%29133%3A11%281171%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/86348
dc.description.abstractA simple analytical model for calculating the nonlinear deformations of a corrugated core (fluting) during out-of-plane compression is developed. The results from the analytical model are compared to a more comprehensive finite-element model and to experiments. A connection between the boundary conditions and the damage state of the corrugated board is discussed. Including a modified set of boundary conditions gives an almost perfect match of the initial stiffness to the experimental results, indicating that the core might be significantly damaged as a result of the manufacturing process. Possibly, the strength of corrugated boards might be increased about 20% if one could avoid damaging the fluting during the manufacturing process.
dc.publisherAmerican Society of Civil Engineers
dc.titleModeling of Out-of-Plane Compression Loading of Corrugated Paper Board Structures
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue11
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2007)133:11(1171)
dc.treeJournal of Engineering Mechanics:;2007:;Volume ( 133 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record