Show simple item record

dc.contributor.authorDongjun Yuk
dc.contributor.authorSolomon C. Yim
dc.contributor.authorArvid Naess
dc.contributor.authorI-Ming Shih
dc.date.accessioned2017-05-08T22:41:00Z
dc.date.available2017-05-08T22:41:00Z
dc.date.copyrightJanuary 2007
dc.date.issued2007
dc.identifier.other%28asce%290733-9399%282007%29133%3A1%2830%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/86324
dc.description.abstractThe response behavior of the single-degree-of-freedom (SDOF) nonlinear structural system subjected to narrowband stochastic excitations studied in Part I is investigated via simulations to verify the stochastic system characteristics assumed in the development of the semianalytical method. In addition, to demonstrate the accuracy of the method, predicted response–amplitude probability distributions are presented and compared to simulation results. Numerical simulations are conducted by directly integrating the SDOF system with the narrowband excitation modeled by the 1971 Shinozuka formulation. It is observed that the proposed semianalytical method is capable of accurately characterizing the stochastic response behavior of the nonlinear system by predicting the response–amplitude probability distribution and capturing the trends of variations in the response–amplitude statistical properties. In both the primary and the subharmonic resonance regions, good agreements between the response–amplitude probability distributions predicted by the semianalytical method and obtained from simulation results are observed both qualitatively and quantitatively. In addition, trends of the variations in the probability masses associated with the modes with variations in excitation parameters (bandwidth and variance) are captured.
dc.publisherAmerican Society of Civil Engineers
dc.titleGlobal and Local Nonlinear System Responses under Narrowband Random Excitations. II: Prediction, Simulation, and Comparison
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue1
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2007)133:1(30)
dc.treeJournal of Engineering Mechanics:;2007:;Volume ( 133 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record