Show simple item record

dc.contributor.authorMohamad Ali-Ahmad
dc.contributor.authorKolluru Subramaniam
dc.contributor.authorMichel Ghosn
dc.date.accessioned2017-05-08T22:40:59Z
dc.date.available2017-05-08T22:40:59Z
dc.date.copyrightSeptember 2006
dc.date.issued2006
dc.identifier.other%28asce%290733-9399%282006%29132%3A9%28914%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/86306
dc.description.abstractThe last few years have witnessed a wide use of externally bonded fiber reinforced polymer (FRP) sheets for strengthening existing reinforced and prestressed concrete structures. The success of this strengthening method relies on the effectiveness of the load-transfer between the concrete and the FRP. Understanding the stress transfer and the failure of the concrete–FRP interface is essential for assessing the structural performance of strengthened beams and for evaluating the strength gain. This paper describes an experimental investigation of the interfacial bond behavior between concrete and FRP. The strain distributions in concrete and FRP are determined using an optical technique known as digital image correlation. The results confirm that the debonding process can be described in terms of crack propagation through the interface between concrete and FRP. The data obtained from the analysis of digital images was used to determine the interfacial material behavior for the concrete–FRP interface (stress versus relative displacement response) and the fracture parameter
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Investigation and Fracture Analysis of Debonding between Concrete and FRP Sheets
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue9
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2006)132:9(914)
dc.treeJournal of Engineering Mechanics:;2006:;Volume ( 132 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record