Show simple item record

dc.contributor.authorHassan H. Abbas
dc.contributor.authorRichard Sause
dc.contributor.authorRobert G. Driver
dc.date.accessioned2017-05-08T22:40:57Z
dc.date.available2017-05-08T22:40:57Z
dc.date.copyrightAugust 2006
dc.date.issued2006
dc.identifier.other%28asce%290733-9399%282006%29132%3A8%28806%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/86287
dc.description.abstractA theoretical formulation of the linear elastic in-plane and torsional behavior of corrugated web I-girders under in-plane loads is presented. A typical corrugated web steel I-girder consists of two steel flanges welded to a corrugated steel web. Under a set of simplifying assumptions, the equilibrium of an infinitesimal length of a corrugated web I-girder is studied, and the cross-sectional stresses and stress resultants due to primary bending moment and shear are deduced. The analysis shows that a corrugated web I-girder will twist out-of-plane simultaneously as it deflects in-plane under the action of in-plane loads. In the paper, the in-plane bending behavior is analyzed using conventional beam theory, whereas the out-of-plane torsional behavior is analyzed as a flange transverse bending problem. The results for a simply supported span subjected to a uniformly distributed load are presented. Finally, finite element analysis results are presented and compared to the theoretical results for validation.
dc.publisherAmerican Society of Civil Engineers
dc.titleBehavior of Corrugated Web I-Girders under In-Plane Loads
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue8
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2006)132:8(806)
dc.treeJournal of Engineering Mechanics:;2006:;Volume ( 132 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record