Show simple item record

dc.contributor.authorColin MacDougall
dc.contributor.authorF. Michael Bartlett
dc.date.accessioned2017-05-08T22:40:48Z
dc.date.available2017-05-08T22:40:48Z
dc.date.copyrightDecember 2006
dc.date.issued2006
dc.identifier.other%28asce%290733-9399%282006%29132%3A12%281345%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/86196
dc.description.abstractThis paper presents the derivation and experimental validation of a mechanical model for unbonded seven-wire prestressing tendons with a single broken outer wire. The model has practical significance because corrosion of these tendons typically causes a single outer wire to fail first. The tendency for the tendon to deflect toward the broken wire causes strains in the unbroken wires to be unequal at any cross section. As a result, the strains in the two wires adjacent to the broken wire increase significantly due to the wire break. Equations are presented for: (1) the strains along the lengths of the broken and unbroken wires; (2) the affected length, where the broken wire can be detected because its strain is less than the strains in the unbroken wires; and (3) the prestress force remaining after the break occurs. Experimental data obtained from tests of seven-wire tendons performed on an
dc.publisherAmerican Society of Civil Engineers
dc.titleMechanical Model for Unbonded Seven-Wire Tendon with Single Broken Wire
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue12
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2006)132:12(1345)
dc.treeJournal of Engineering Mechanics:;2006:;Volume ( 132 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record