Show simple item record

dc.contributor.authorByung Hwan Oh
dc.contributor.authorEui Sung Kim
dc.contributor.authorYoung Cheol Choi
dc.date.accessioned2017-05-08T22:40:45Z
dc.date.available2017-05-08T22:40:45Z
dc.date.copyrightOctober 2006
dc.date.issued2006
dc.identifier.other%28asce%290733-9399%282006%29132%3A10%281057%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/86161
dc.description.abstractThe realistic design of pretensioned prestressed concrete members requires adequate determination of transfer length for prestress forces. The purpose of the present paper is to propose a rational theory, which can evaluate the transfer lengths realistically for arbitrary designed pretensioned members. The theory considers the prestressing steel as a solid cylinder and the surrounding concrete as a hollow cylinder. The compatibility condition is then imposed at the steel–concrete interface with an appropriate equilibrium equation. The possible cracking of surrounding concrete in a radial direction due to expansive pressure after prestress transfer has been considered by employing an appropriate tensile stress–crack width relation. The equilibrium equations are solved for each successive segment in longitudinal direction and the strain buildup curves from the end of pretensioned members are obtained, which provides the basis for the determination of transfer length. Comprehensive tests were conducted to measure the transfer lengths for various design variables, including the concrete strength, strand diameter, cover thickness, and strand spacing. The measured values of transfer lengths were compared with the calculated ones and the comparison indicates that the theoretical prediction exhibits good correlation with test data. The proposed theory allows more realistic prediction of transfer lengths for rational design of actual pretensioned prestressed concrete members.
dc.publisherAmerican Society of Civil Engineers
dc.titleTheoretical Analysis of Transfer Lengths in Pretensioned Prestressed Concrete Members
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue10
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2006)132:10(1057)
dc.treeJournal of Engineering Mechanics:;2006:;Volume ( 132 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record